Section I. Product identification and uses	Section II. Hazardous ingredients
Product name       - Hagen Catnip Spray	Isobutane - 5.95%   TLV - 1000 ppm  Propane - 1.05% (Asphyxiant)
Chemical formula  - 219-011
Chemical Family   - Catnip Spray
Material uses        - Pure catnip extract

Section III. Physical data
Physical state and appearance/odor	Clear, dark brown solution with characterisitic odor
pH	Not available
Percent volatile	97%
Freezing point	Not Available
Boiling point	Not available
Specific gravity	0.94
Vapor density	>1
Vapor pressure (psig)	55
Evaporation rate	>1
Solubility in water	Complete

Section IV. Fire and explosion data
Flash Point (TCC)	Propellant only - approx. 100° C
Flammable limits in air	No Data
Means of extinction	Any media
Special fire fighting procedures	Aerosol will explode when heated
Unusual fire and explosion hazards	Aerosol

Section V. Reactivity data
Stable
Conditions to avoid	No Data
Hazardous products of decomposition	Oxides of carbon
Dangerous Polymerization	Will not occur

Section VI. Health Hazard Data
Threshold Limit Value	See Section II
Effects of overexposure	Slight to moderate irritation can occur to eyes, skin or mucous. Ingestion of large amounts of liquid may irritate gastrointestinal tracts.
Emergency anf First Aid procedures	Skin and eyes. Flush with plenty of water. Obtain medical attention if irritation persists.  If ingested, induce vomitting. Call physician immediately.

Section VII. Special Protection Information
Respiratory Protection	Filtered face mask if used on a continuous basis
Ventilation	Local exhaust  Mechanical Ventilation recommended if used on a continuous basis
Protective Gloves	Not Required
Eye protection	Safety glasses recommended
Other Protective Equipment	Not required

Section VIII. Special Precautions
Precautions to be taken in handling and storing	Use as directed.  Store out of the reach of children, in a cool well-ventilated area.  Not above 50° C

Section IX. Spill, Leak and Disposal Procedures
Action to take for spills or leaks	Remove all sources of ignition.   Use inert absorbent material and non-sparking tools.   Avoid breathing fumes.
Waste disposal method	Dispose in accordance with local, provincial and/or federal regulations.

Prepared by  Rolf C. Hagen Inc.   (514) 457-0914

Validated January 16, 1989